Home> Products> lower overall costs

{ "products": [ { "_id": "635e191da2024c00014bc31f", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD2-UT2-Ex1", "description": "1-channel isolated barrier\n24 V DC supply (Power Rail)\nThermocouple, RTD, potentiometer or voltage input\nCurrent output 0/4 mA ... 20 mA\nSink or source mode\nConfigurable by PACTware\nLine fault (LFD) and sensor burnout detection\nUp to SIL 2 acc. to IEC 61508/IEC 61511\nGeneral specifications\nSignal type\tAnalog input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSupply\nConnection\tterminals 9+, 10- or power feed module/Power Rail\nRated voltage\t19 ... 30 V DC\nRipple\twithin the supply tolerance\nPower dissipation\t≤ 0.98 W\nPower consumption\tmax. 0.98 W\nInterface\nProgramming interface\tprogramming socket\nInput\nConnection side\tfield side\nConnection\tterminals 1, 2, 3, 4\nRTD\ttype Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995)\ntype Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94)\ntype Cu10, Cu50, Cu100 (P50353-92)\ntype Ni100 (DIN 43760)\nMeasuring current\tapprox. 200 µA with RTD\nTypes of measuring\t2-, 3-, 4-wire connection\nLead resistance\tmax. 50 Ω per line\nMeasurement loop monitoring\tsensor breakage, sensor short-circuit\nThermocouples\ttype B, E, J, K, N, R, S, T (IEC 584-1: 1995)\ntype L (DIN 43710: 1985)\ntype TXK, TXKH, TXA (P8.585-2001)\nCold junction compensation\texternal and internal\nMeasurement loop monitoring\tsensor breakage\nPotentiometer\t0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection)\nVoltage\tselectable within the range -100 ... 100 mV\nInput resistance\t≥ 1 MΩ (-100 ... 100 mV)\nOutput\nConnection side\tcontrol side\nConnection\tterminal 5: source (-), terminal 6: source (+), terminal 7: sink(-), terminal 8: sink (+)\nOutput\tAnalog current output\nCurrent range\t0 ... 20 mA or 4 ... 20 mA\nFault signal\tdownscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43)\nSource\tload 0 ... 550 Ω\nopen-circuit voltage ≤ 18 V\nSink\tVoltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V,\nseries resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage.\nThe maximum value of the resistance is (V - 5)/0.0215 Ω.\nTransfer characteristics\nDeviation\t\nAfter calibration\tPt100: ± (0.06 % of measurement value in K + 0.1 % of span + 0.1 K (4-wire connection))\nthermocouple: ± (0.05 % of measurement value in °C + 0.1 % of span + 1.5 K (1.7 K for types R and S)) , includes ± 1.3 K fault of the cold junction compensation (CJC)\nmV: ± (50 µV + 0.1 % of span)\npotentiometer: ± (0.05 % of full scale + 0.1 % of span, (excludes faults due to lead resistance))\nInfluence of ambient temperature\tPt100: ± (0.0015 % of measurement value in K + 0.006 % of span)/K ΔTamb*)\nthermocouple: ± (0.02 K + 0.005 % of measurement value in °C + 0.006 % of span)/K ΔTamb*)), influence of cold junction compensation (CJC) included\nmV: ± (0.01 % of measurement value + 0.006 % of span)/K ΔTamb*)\npotentiometer: ± 0.006 % of span/K ΔTamb*)\n*) ΔTamb = ambient temperature change referenced to 23 °C (296 K)\nInfluence of supply voltage\t< 0.01 % of span\nInfluence of load\t≤ 0.001 % of output value per 100 Ω\nReaction time\tworst case value (sensor breakage and/or sensor short circuit detection enabled)\nmV: 1 s, thermocouples with CJC: 1.1 s, thermocouples with fixed reference temperature: 1.1 s, 3- or 4-wire RTD: 920 ms, 2-wire RTD: 800 ms, Potentiometer: 2.05 s\nGalvanic isolation\nOutput/supply, programming input\tfunctional insulation, rated insulation voltage 50 V AC\nThere is no electrical isolation between the programming input and the supply.\nThe programming cable provides galvanic isolation so that ground loops are avoided.\nIndicators/settings\nDisplay elements\tLEDs\nConfiguration\tvia PACTware\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2012\nEN 61326-3-2:2008\nDegree of protection\tIEC 60529:2001\nProtection against electrical shock\tUL 61010-1:2004\nAmbient conditions\nAmbient temperature\t-20 ... 70 °C (-4 ... 158 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tBASEEFA 13 ATEX 0102 X\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC , Ex-Hexagon II (1)D [Ex ia Da] IIIC , Ex-Hexagon I (M1) [Ex ia Ma] I\nInput\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\nInputs\tterminals 1, 2, 3, 4\nVoltage Uo\t9 V\nCurrent Io\t13.1 mA\nPower Po\t30 mW\nAnalog outputs, power supply, collective error\t\nMaximum safe voltage\t250 V (Attention! This is not the rated voltage.)\nInterface\t\nMaximum safe voltage\t250 V (Attention! The rated voltage is lower.), RS 232\nCertificate\tBASEEFA 13 ATEX 0103 X\nMarking\tEx-Hexagon II 3G Ex nA II T4 Gc [device in zone 2]\nGalvanic isolation\t\nInput/Other circuits\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010\nInternational approvals\nUL approval\t\nControl drawing\t116-0379 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx BAS 13.0057X\nIECEx marking\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "1 s", "Ex ia Da", "Ex ia Ma", "Ex ia Ga", "V DC supply", "output value", "x 119 x 114 mm", "measurement value", "reference temperature", "voltage peak value 375", "insulation voltage 50 V", "electrical isolation acc", "cold junction compensation", "ambient temperature change", "sensor short circuit detection" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 59, "imageuri": "https://productimages.withfloats.com/actual/635e191fe52a05000198be38.png", "tileimageuri": "https://productimages.withfloats.com/tile/635e191fe52a05000198be38.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:26:37.668Z", "updatedon": "2022-10-30T06:26:37.668Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/kcd2-ut2-ex1/59", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "Universal Temperature Converter", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e174f44ad890001abba37", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD0-SD-Ex1.1245", "description": "1-channel isolated barrier\n24 V DC supply (loop powered)\nCurrent limit 45 mA at 12 V DC\nHousing width 12.5 mm\nUp to SIL 3 acc. to IEC/EN 61508\nGeneral specifications\nSignal type\tDigital Output\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 3\nSupply\nRated voltage\tloop powered\nPower dissipation\t< 1 W\nInput\nConnection side\tcontrol side\nConnection\tterminals 5, 6\nRated voltage\t19 ... 30 V DC\nCurrent\t≤ 72 mA at Ui = 19 V, ≤ 50 mA at Ui = 30 V with 265 Ω output load\n≤ 45 mA at Ui = 19 V, ≤ 31 mA at Ui = 30 V with shorted output\n≤ 14 mA at Ui = 19 V, ≤ 11 mA at Ui = 30 V no load at output\nInrush current\t≤ 200 mA after 100 µs\nOutput\nConnection side\tfield side\nConnection\tterminals 1+, 2-\nInternal resistor\t≤ 238 Ω\nCurrent\t≤ 45 mA\nVoltage\t≥ 12 V\nOpen loop voltage\t≥ 22.7 V\nOutput rated operating current\t45 mA\nOutput signal\tThese values are valid for the rated operating voltage 19 ... 30 V DC.\nEnergized/De-energized delay\tsingle operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs\nGalvanic isolation\nInput/Output\treinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff\nIndicators/settings\nDisplay elements\tLED\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21\nDegree of protection\tIEC 60529\nProtection against electrical shock\tUL 61010-1\nAmbient conditions\nAmbient temperature\t-20 ... 60 °C (-4 ... 140 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tBASEEFA 06 ATEX 0170\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC , Ex-Hexagon II (1)D [Ex ia Da] IIIC , Ex-Hexagon I (M1) [Ex ia Ma] I\nOutput\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\nVoltage\t25.2 V\nCurrent\t110 mA\nPower\t693 mW\nInput\t\nMaximum safe voltage\t250 V (Attention! The rated voltage can be lower.)\nCertificate\tPF 06 CERT 0971 X\nMarking\tEx-Hexagon II 3G Ex nA IIC T4 Gc\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010\nInternational approvals\nFM approval\t\nControl drawing\t116-0419 (cFMus)\nUL approval\t\nControl drawing\t116-0420 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx BAS 06.0032\nIECEx marking\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "30 V", "19 V", "12 V", "Ex ia Da", "Ex ia Ga", "Ex ia Ma", "II 3G Ex", "V DC supply", "limit 45 mA", "x 119 x 114 mm", "operating voltage 19", "industrial locations", "insulation voltage 300", "voltage peak value 375", "electrical isolation acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 57, "imageuri": "https://productimages.withfloats.com/actual/635e1752e52a05000198bdfd.png", "tileimageuri": "https://productimages.withfloats.com/tile/635e1752e52a05000198bdfd.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:18:55.768Z", "updatedon": "2022-10-30T06:18:55.768Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/kcd0-sd-ex1-1245/57", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "Solenoid Driver", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e1582c5dc8b0001d08820", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD2-SR-Ex2", "description": "2-channel isolated barrier\n24 V DC supply (Power Rail)\nDry contact or NAMUR inputs\nRelay contact output\nLine fault detection (LFD)\nHousing width 12.5 mm\nUp to SIL 2 acc. to IEC/EN 61508\nGeneral specifications\nSignal type\tDigital Input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSupply\nConnection\tPower Rail or terminals 9+, 10-\nRated voltage\t19 ... 30 V DC\nRipple\t≤ 10 %\nRated current\t≤ 46 mA\nPower dissipation\t≤ 900 mW\nPower consumption\t≤ 900 mW\nInput\nConnection side\tfield side\nConnection\tterminals 1+, 2-; 3+, 4-\nRated values\tacc. to EN 60947-5-6 (NAMUR)\nOpen circuit voltage/short-circuit current\tapprox. 8 V DC / approx. 8 mA\nSwitching point/switching hysteresis\t1.2 ... 2.1 mA / approx. 0.2 mA\nLine fault detection\tbreakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA\nPulse/Pause ratio\tmin. 20 ms / min. 20 ms\nOutput\nConnection side\tcontrol side\nConnection\tterminals 5, 6; 7, 8\nOutput I\tsignal ; relay\nOutput II\tsignal ; relay\nContact loading\t250 V AC/2 A/cos φ > 0.75; 126.5 V AC/4 A/cos φ > 0.75; 30 V DC/2 A resistive load\nMinimum switch current\t2 mA / 24 V DC\nEnergized/De-energized delay\t≤ 20 ms / ≤ 20 ms\nMechanical life\t107 switching cycles\nTransfer characteristics\nSwitching frequency\t≤ 10 Hz\nGalvanic isolation\nInput/Output\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nInput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/Output\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nIndicators/settings\nDisplay elements\tLEDs\nControl elements\tDIP switch\nConfiguration\tvia DIP switches\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nLow voltage\t\nDirective 2014/35/EU\tEN 61010-1:2010+A1:2019+A1:2019/AC:2019\nConformity\nElectromagnetic compatibility\tNE 21:2017 , EN 61326-3-1:2017 , EN IEC 61326-3-2:2018\nDegree of protection\tIEC 60529:1989+A1:1999+A2:2013\nFunctional safety\tIEC/EN 61508:2010\nInput\tEN 60947-5-6:2000\nAmbient conditions\nAmbient temperature\t-40 ... 70 °C (-40 ... 158 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tBASEEFA 06 ATEX 0092 X\nMarking\tEx-Hexagon II 3(1)G Ex ec nC [ia Ga] IIC T4 Gc , Ex-Hexagon II (1)D [Ex ia Da] IIIC , Ex-Hexagon I (M1) [Ex ia Ma] I\nInput\tEx ia\nVoltage\t10.5 V\nCurrent\t13 mA\nPower\t34 mW (linear characteristic)\nSupply\t\nMaximum safe voltage\t253 V AC (Attention! Um is no rated voltage.)\nOutput\t\nContact loading\tZone 2 : 50 V AC/2 A/cos φ > 0.75; 30 V DC/2 A resistive load\nMaximum safe voltage\t253 V AC (Attention! The rated voltage can be lower.)\nFault indication output\t\nMaximum safe voltage\t40 V DC (Attention! Um is no rated voltage.)\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nInput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN IEC 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019\nInternational approvals\nUL approval\tE106378\nControl drawing\t116-0477 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx BAS 06.0025 X\nIECEx marking\tEx ec nC [ia Ga] IIC T4 Gc\n[Ex ia Da] IIIC\n[Ex ia Ma] I", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "V AC", "30 V", "24 V", "EN IEC", "8 V DC", "Ex ia Da", "SIL 2 acc", "V DC supply", "x 119 x 114 mm", "industrial locations", "linear characteristic", "insulation voltage 300", "voltage peak value 375", "electrical isolation acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 55, "imageuri": "https://productimages.withfloats.com/actual/635e15845d8f8c0001fd05b6.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/635e15845d8f8c0001fd05b6.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:11:14.65Z", "updatedon": "2022-10-30T06:11:14.65Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/kcd2-sr-ex2/55", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "Switch Amplifier", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e143fc5dc8b0001d08818", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KFD2-SR2-Ex2.W", "description": "2-channel isolated barrier\n24 V DC supply (Power Rail)\nDry contact or NAMUR inputs\nRelay contact output\nLine fault detection (LFD)\nReversible mode of operation\nUp to SIL 2 acc. to IEC 61508/IEC 61511\nGeneral specifications\nSignal type\tDigital Input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSupply\nConnection\tPower Rail or terminals 14+, 15-\nRated voltage\t19 ... 30 V DC\nRipple\t≤ 10 %\nRated current\t≤ 50 mA\nPower dissipation\t≤ 1 W\nPower consumption\t≤ 1 W\nInput\nConnection side\tfield side\nConnection\tterminals 1+, 2+, 3-; 4+, 5+, 6-\nRated values\tacc. to EN 60947-5-6 (NAMUR)\nOpen circuit voltage/short-circuit current\tapprox. 8 V DC / approx. 8 mA\nSwitching point/switching hysteresis\t1.2 ... 2.1 mA / approx. 0.2 mA\nLine fault detection\tbreakage I ≤ 0.1 mA , short-circuit I > 6 mA\nPulse/Pause ratio\tmin. 20 ms / min. 20 ms\nOutput\nConnection side\tcontrol side\nConnection\toutput I: terminals 7, 8, 9 ; output II: terminals 10, 11, 12\nOutput I, II\tsignal, relay\nContact loading\t250 V AC/2 A/cos φ > 0.75; 126.5 V AC/4 A/cos φ > 0.75; 40 V DC/2 A resistive load\nMinimum switch current\t2 mA / 24 V DC\nEnergized/De-energized delay\tapprox. 20 ms / approx. 20 ms\nMechanical life\t107 switching cycles\nCollective error message\tPower Rail\nTransfer characteristics\nSwitching frequency\t≤ 10 Hz\nGalvanic isolation\nInput/Output\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nInput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/Output\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nIndicators/settings\nDisplay elements\tLEDs\nControl elements\tDIP switch\nConfiguration\tvia DIP switches\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nLow voltage\t\nDirective 2014/35/EU\tEN 61010-1:2010+A1:2019+A1:2019/AC:2019\nConformity\nElectromagnetic compatibility\tNE 21:2017 , EN 61326-3-1:2017 , EN IEC 61326-3-2:2018\nDegree of protection\tIEC 60529:1989+A1:1999+A2:2013\nFunctional safety\tIEC/EN 61508:2010\nInput\tEN 60947-5-6:2000\nAmbient conditions\nAmbient temperature\t-20 ... 70 °C (-4 ... 158 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 150 g\nDimensions\t20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tPTB 00 ATEX 2080\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC\nEx-Hexagon II (1)D [Ex ia Da] IIIC\nEx-Hexagon I (M1) [Ex ia Ma] I\nInput\tEx ia\nVoltage\t10.5 V\nCurrent\t13 mA\nPower\t34 mW (linear characteristic)\nSupply\t\nMaximum safe voltage\t253 V AC / 125 V DC (Attention! Um is no rated voltage.)\nOutput\t\nMaximum safe voltage\t253 V AC (Attention! The rated voltage can be lower.)\nFault indication output\t\nMaximum safe voltage\t40 V DC (Attention! Um is no rated voltage.)\nCertificate\tPF 08 CERT 0803\nMarking\tEx-Hexagon II (3)G [Ex ic Gc] IIC\nInput\tEx ic\nVoltage\t10.5 V\nCurrent\t13 mA\nPower\t34 mW (linear characteristic)\nCertificate\tTÜV 99 ATEX 1493 X\nMarking\tEx-Hexagon II 3G Ex ec nC IIC T4 Gc\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nInput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019\nInternational approvals\nFM approval\t\nFM certificate\tFM19US0207X\nControl drawing\t116-0035\nUL approval\tE106378\nControl drawing\t116-0473 (cULus)\nContact loading\t250 V AC/2 A/cos φ > 0.75; 126.5 V AC/4 A/cos φ > 0.75; 30 V DC/2 A resistive load\nIECEx approval\t\nIECEx certificate\tIECEx PTB 11.0034 , IECEx TUN 19.0013X\nIECEx marking\t[Ex ia Ga] IIC\n[Ex ia Da] IIIC\n[Ex ia Ma] I\nEx ec nC IIC T4 Gc", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "V AC", "30 V", "24 V", "40 V", "8 V DC", "EN IEC", "125 V DC", "SIL 2 acc", "V DC supply", "x 119 x 115 mm", "II 3G Ex ec nC IIC T4", "linear characteristic", "insulation voltage 300", "voltage peak value 375", "electrical isolation acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 54, "imageuri": "https://productimages.withfloats.com/actual/635e14415d8f8c0001fd059e.png", "tileimageuri": "https://productimages.withfloats.com/tile/635e14415d8f8c0001fd059e.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:05:51.646Z", "updatedon": "2022-10-30T06:05:51.646Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM//kfd2-sr2-ex2-w/54", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "Switch Amplifier", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e135d36a6d00001c423ff", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD2-SR-Ex1.LB", "description": "1-channel isolated barrier\n24 V DC supply (Power Rail)\nDry contact or NAMUR inputs\nUsable as signal splitter (1 input and 2 outputs)\nRelay contact output\nFault relay contact output\nLine fault detection (LFD)\nHousing width 12.5 mm\nUp to SIL 2 acc. to IEC/EN 61508\nGeneral specifications\nSignal type\tDigital Input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSupply\nConnection\tPower Rail or terminals 9+, 10-\nRated voltage\t19 ... 30 V DC\nRipple\t≤ 10 %\nRated current\t≤ 37 mA\nPower dissipation\t≤ 750 mW\nPower consumption\t≤ 750 mW\nInput\nConnection side\tfield side\nConnection\tterminals 1+, 2-\nRated values\tacc. to EN 60947-5-6 (NAMUR)\nOpen circuit voltage/short-circuit current\tapprox. 8 V DC / approx. 8 mA\nSwitching point/switching hysteresis\t1.2 ... 2.1 mA / approx. 0.2 mA\nLine fault detection\tbreakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA\nPulse/Pause ratio\tmin. 20 ms / min. 20 ms\nOutput\nConnection side\tcontrol side\nConnection\toutput I: terminals 5, 6 ; output II: terminals 7, 8\nOutput I\tsignal ; relay\nOutput II\tsignal or error message ; relay\nContact loading\t250 V AC/2 A/cos φ > 0.75; 126.5 V AC/4 A/cos φ > 0.75; 30 V DC/2 A resistive load\nMinimum switch current\t2 mA / 24 V DC\nEnergized/De-energized delay\t≤ 20 ms / ≤ 20 ms\nMechanical life\t107 switching cycles\nTransfer characteristics\nSwitching frequency\t≤ 10 Hz\nGalvanic isolation\nInput/Output\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nInput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/Output\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nIndicators/settings\nDisplay elements\tLEDs\nControl elements\tDIP switch\nConfiguration\tvia DIP switches\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nLow voltage\t\nDirective 2014/35/EU\tEN 61010-1:2010+A1:2019+A1:2019/AC:2019\nConformity\nElectromagnetic compatibility\tNE 21:2017 , EN 61326-3-1:2017 , EN IEC 61326-3-2:2018\nDegree of protection\tIEC 60529:1989+A1:1999+A2:2013\nFunctional safety\tIEC/EN 61508:2010\nInput\tEN 60947-5-6:2000\nAmbient conditions\nAmbient temperature\t-40 ... 70 °C (-40 ... 158 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tBASEEFA 06 ATEX 0092 X\nMarking\tEx-Hexagon II 3(1)G Ex ec nC [ia Ga] IIC T4 Gc , Ex-Hexagon II (1)D [Ex ia Da] IIIC , Ex-Hexagon I (M1) [Ex ia Ma] I\nInput\tEx ia\nVoltage\t10.5 V\nCurrent\t13 mA\nPower\t34 mW (linear characteristic)\nSupply\t\nMaximum safe voltage\t253 V AC (Attention! Um is no rated voltage.)\nOutput\t\nContact loading\tZone 2 : 50 V AC/2 A/cos φ > 0.75; 30 V DC/2 A resistive load\nMaximum safe voltage\t253 V AC (Attention! The rated voltage can be lower.)\nFault indication output\t\nMaximum safe voltage\t40 V DC (Attention! Um is no rated voltage.)\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nInput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN IEC 60079-0:2018 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019\nInternational approvals\nUL approval\tE106378\nControl drawing\t116-0477 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx BAS 06.0025 X\nIECEx marking\tEx ec nC [ia Ga] IIC T4 Gc\n[Ex ia Da] IIIC\n[Ex ia Ma] I", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "V AC", "30 V", "EN IEC", "8 V DC", "1 input", "SIL 2 acc", "2 outputs", "V DC supply", "terminals 5", "x 119 x 114 mm", "linear characteristic", "insulation voltage 300", "voltage peak value 375", "electrical isolation acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 53, "imageuri": "https://productimages.withfloats.com/actual/635e135fc7b01e0001eb35f1.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/635e135fc7b01e0001eb35f1.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:02:05.554Z", "updatedon": "2022-10-30T06:02:05.554Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/kcd2-sr-ex1-lb/53", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "Switch Amplifier", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e123fa2024c00014bc30f", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KFD2-SR2-Ex1.W.LB", "description": "1-channel isolated barrier\n24 V DC supply (Power Rail)\nDry contact or NAMUR inputs\nUsable as signal splitter (1 input and 2 outputs)\nRelay contact output\nFault relay contact output\nLine fault detection (LFD)\nReversible mode of operation\nUp to SIL 2 acc. to IEC 61508/IEC 61511\nGeneral specifications\nSignal type\tDigital Input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSupply\nConnection\tPower Rail or terminals 14+, 15-\nRated voltage\t19 ... 30 V DC\nRipple\t≤ 10 %\nRated current\t≤ 45 mA\nPower dissipation\t≤ 0.9 W\nPower consumption\t≤ 0.9 W\nInput\nConnection side\tfield side\nConnection\tterminals 1+, 2+, 3-\nRated values\tacc. to EN 60947-5-6 (NAMUR)\nOpen circuit voltage/short-circuit current\tapprox. 8 V DC / approx. 8 mA\nSwitching point/switching hysteresis\t1.2 ... 2.1 mA / approx. 0.2 mA\nLine fault detection\tbreakage I ≤ 0.1 mA , short-circuit I > 6 mA\nPulse/Pause ratio\tmin. 20 ms / min. 20 ms\nOutput\nConnection side\tcontrol side\nConnection\toutput I: terminals 7, 8, 9 ; output II: terminals 10, 11, 12\nOutput I\tsignal ; relay\nOutput II\tsignal or fault message ; relay\nContact loading\t250 V AC/2 A/cos φ > 0.75; 126.5 V AC/4 A/cos φ > 0.75; 40 V DC/2 A resistive load\nMinimum switch current\t2 mA / 24 V DC\nEnergized/De-energized delay\tapprox. 20 ms / approx. 20 ms\nMechanical life\t107 switching cycles\nCollective error message\tPower Rail\nTransfer characteristics\nSwitching frequency\t≤ 10 Hz\nGalvanic isolation\nInput/Output\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nInput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/Output\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nIndicators/settings\nDisplay elements\tLEDs\nControl elements\tDIP switch\nConfiguration\tvia DIP switches\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nLow voltage\t\nDirective 2014/35/EU\tEN 61010-1:2010+A1:2019+A1:2019/AC:2019\nConformity\nElectromagnetic compatibility\tNE 21:2017 , EN 61326-3-1:2017 , EN IEC 61326-3-2:2018\nDegree of protection\tIEC 60529:1989+A1:1999+A2:2013\nFunctional safety\tIEC/EN 61508:2010\nInput\tEN 60947-5-6:2000\nAmbient conditions\nAmbient temperature\t-20 ... 70 °C (-4 ... 158 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 150 g\nDimensions\t20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tPTB 00 ATEX 2080\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC\nEx-Hexagon II (1)D [Ex ia Da] IIIC\nEx-Hexagon I (M1) [Ex ia Ma] I\nInput\tEx ia\nVoltage\t10.5 V\nCurrent\t13 mA\nPower\t34 mW (linear characteristic)\nSupply\t\nMaximum safe voltage\t253 V AC / 125 V DC (Attention! Um is no rated voltage.)\nOutput\t\nMaximum safe voltage\t253 V AC (Attention! The rated voltage can be lower.)\nFault indication output\t\nMaximum safe voltage\t40 V DC (Attention! Um is no rated voltage.)\nCertificate\tPF 08 CERT 0803\nMarking\tEx-Hexagon II (3)G [Ex ic Gc] IIC\nInput\tEx ic\nVoltage\t10.5 V\nCurrent\t13 mA\nPower\t34 mW (linear characteristic)\nCertificate\tTÜV 99 ATEX 1493 X\nMarking\tEx-Hexagon II 3G Ex ec nC IIC T4 Gc\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nInput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012 , EN IEC 60079-15:2019\nInternational approvals\nFM approval\t\nFM certificate\tFM19US0207X\nControl drawing\t116-0035\nUL approval\tE106378\nControl drawing\t116-0473 (cULus)\nContact loading\t250 V AC/2 A/cos φ > 0.75; 126.5 V AC/4 A/cos φ > 0.75; 30 V DC/2 A resistive load\nIECEx approval\t\nIECEx certificate\tIECEx PTB 11.0034 , IECEx TUN 19.0013X\nIECEx marking\t[Ex ia Ga] IIC\n[Ex ia Da] IIIC\n[Ex ia Ma] I\nEx ec nC IIC T4 Gc", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "V AC", "30 V", "24 V", "40 V", "8 V DC", "EN IEC", "125 V DC", "SIL 2 acc", "V DC supply", "x 119 x 115 mm", "II 3G Ex ec nC IIC T4", "linear characteristic", "insulation voltage 300", "voltage peak value 375", "electrical isolation acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 52, "imageuri": "https://productimages.withfloats.com/actual/635e12405d8f8c0001fd0509.png", "tileimageuri": "https://productimages.withfloats.com/tile/635e12405d8f8c0001fd0509.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T05:57:19.18Z", "updatedon": "2022-10-30T05:57:19.18Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM//kfd2-sr2-ex1-w-lb/52", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "Switch Amplifier", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e110bf7c0e00001ca7e77", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD2-STC-Ex1.2O", "description": "1-channel isolated barrier\n24 V DC supply (Power Rail)\nInput for 2-wire SMART transmitters and current sources\nSignal splitter (1 input and 2 outputs)\nDual output 0/4 mA ... 20 mA or 0/1 V ... 5 V\nTerminal blocks with test sockets\nSIL 2 (SC 3) acc. to IEC/EN 61508\nGeneral specifications\nSignal type\tAnalog input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSystematic capability (SC)\tSC 3\nSupply\nConnection\tPower Rail or terminals 9+, 10-\nRated voltage\t19 ... 30 V DC\nRipple\twithin the supply tolerance\nPower dissipation\tapprox. 1.4 W at 20 mA transfer current, 250 Ω in both outputs\nPower consumption\t2 W\nInput\nConnection side\tfield side\nConnection\tterminals 1+, 2- (sink); 3+, 4- (source)\nInput signal\t0/4 ... 20 mA\nVoltage drop\tterminals 3, 4: ≤ 6.1 V at 20 mA\nShort-circuit current\tterminals 1+, 2-: 25 mA\nInput resistance\tterminals 1+, 2-: max. 500 Ω (BRAIN)\n(250 Ω load)\nAvailable voltage\tterminals 1+, 2-: ≥ 16 V at 20 mA , ≥ 18.5 V at 4 mA\nOutput\nConnection side\tcontrol side\nConnection\tsource: terminals 5-, 6+; 7-, 8+\nsink: terminals 5+, 6-, 7+, 8-\nLoad\tchannel 1: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V)\nchannel 2: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V)\nOutput signal\t0/4 ... 20 mA or 0/1 ... 5 V\nRipple\tmax. 50 µA rms\nTransfer characteristics\nDeviation\tIout < 20 µA (0.1 %); Vout < 10 mV (0.2 %) incl. calibration, linearity, hysteresis and fluctuation of supply voltage, at 20 °C (68 °F), 0/4 ... 20 mA, 0/1 ... 5 V\nInfluence of ambient temperature\tcurrent output: 0.25 µA/K\nvoltage output: 80 µV/K\nFrequency range\tfield side into the control side: bandwidth with 0.5 Vpp signal 0 ... 6 kHz (-3 dB)\ncontrol side into the field side: bandwidth with 0.5 Vpp signal 0.3 ... 6 kHz (-3 dB)\nSettling time\t6 ms\nRise time/fall time\t2 ms\nGalvanic isolation\nOutput/power supply\tfunctional insulation, rated insulation voltage 50 V AC\nOutput/Output\tfunctional insulation, rated insulation voltage 50 V AC\nIndicators/settings\nDisplay elements\tLED\nControl elements\tDIP switch\nConfiguration\tvia DIP switches\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2012\nEN 61326-3-2:2008\nDegree of protection\tIEC 60529:2001\nProtection against electrical shock\tUL 61010-1:2012\nAmbient conditions\nAmbient temperature\t-20 ... 60 °C (-4 ... 140 °F)\nextended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tBASEEFA 13 ATEX 0077 X\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC\nEx-Hexagon II (1)D [Ex ia Da] IIIC\nEx-Hexagon I (M1) [Ex ia Ma] I\nInput\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\nSupply\t\nMaximum safe voltage\t250 V (Attention! The rated voltage can be lower.)\nEquipment\tterminals 1+, 2-\nVoltage\t25.2 V\nVoltage\t28.2 V\nCurrent\t93 mA\nPower\t656 mW\nInternal capacitance\t10 nF\nInternal inductance\t0 mH\nEquipment\tterminals 3+, 4-\nVoltage\t30 V\nCurrent\t115 mA\nPower\t700 mW\nVoltage\t5 V\nCurrent\t6.8 mA\nPower\t1.6 mW\nOutput\t\nMaximum safe voltage\t250 V (Attention! The rated voltage can be lower.)\nCertificate\tBASEEFA 13 ATEX 0078 X\nMarking\tEx-Hexagon II 3G Ex nA II T4 Gc [device in zone 2]\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nInput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010\nInternational approvals\nUL approval\t\nControl drawing\t116-0380 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx BAS 13.0043X\nIECEx marking\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "5 V", "1 input", "Ex ia Da", "Ex ia Ma", "Ex ia Ga", "V DC supply", "Vpp signal 0", "supply voltage", "20 mA transfer current", "voltage peak value 375", "insulation voltage 50 V", "electrical isolation acc", "ambient temperature range", "35 mm DIN mounting rail acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 51, "imageuri": "https://productimages.withfloats.com/actual/635e110be52a05000198bd1d.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/635e110be52a05000198bd1d.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T05:52:11.653Z", "updatedon": "2022-10-30T05:52:11.653Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/kcd2-stc-ex1-2o/51", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": " SMART Transmitter Power Supply", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e0f90f7c0e00001ca7e6f", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KFD2-STC5-Ex1.2O", "description": "\n1-channel isolated barrier\n24 V DC supply (Power Rail)\nInput 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources\nSignal splitter (1 input and 2 outputs)\nDual output 4 mA ... 20 mA current sink/current source\nTerminals with test points\nSIL 2 (SC 3) acc. to IEC/EN 61508\nGeneral specifications\nSignal type\tAnalog input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSystematic capability (SC)\tSC 3\nSupply\nConnection\tPower Rail or terminals 14+, 15-\nRated voltage\t18 ... 30 V DC\nRipple\twithin the supply tolerance\nPower dissipation\t≤ 1 W at maximum load\nPower consumption\t≤ 1.7 W at maximum load\nInput\nConnection side\tfield side\nConnection\tterminals 1+, 2-, 3\nInput signal\t4 ... 20 mA\nOpen circuit voltage/short-circuit current\tterminals 1+, 3: 23 V / 25 mA\nInput resistance\tmax. 265 Ω terminals 2-, 3 , max. 330 Ω terminals 1+, 3\nAvailable voltage\t≥ 16 V at 20 mA ; ≥ 20 V at 4 mA , terminals 1+, 3\nOutput\nConnection side\tcontrol side\nConnection\tterminals 7+, 8-, 9-; 10+, 11-, 12- (sink)\nterminals 7-, 8+, 9+; 10-, 11+, 12+ (source)\nsee additional information\nLoad\t0 ... 600 Ω\nOutput signal\t4 ... 20 mA (overload > 25 mA)\nRipple\tmax. 50 µA rms\nExternal supply (loop)\t2 ... 30 V DC\nIf the external voltage is > 19 V, a load ≥ ((V - 19) / 0.02) Ω is required. V represents the value of the external voltage.\nThe internal 250 Ω resistor at terminals 9 and 12 can be used as a load.\nTransfer characteristics\nDeviation\tat 20 °C (68 °F), 4 ... 20 mA\n≤ 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage\nInfluence of ambient temperature\t≤ 0.25 µA/K\nFrequency range\tfield side into the control side: bandwidth with 0.5 Vpp signal 0 ... 7.5 kHz (-3 dB)\ncontrol side into the field side: bandwidth with 0.5 Vpp signal 0.3 ... 7.5 kHz (-3 dB)\nSettling time\t200 µs\nRise time/fall time\t100 µs\nGalvanic isolation\nOutput/power supply\tfunctional insulation, rated insulation voltage 50 V AC\nOutput/Output\tfunctional insulation, rated insulation voltage 50 V AC\nIndicators/settings\nDisplay elements\tLED\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2012\nEN 61326-3-2:2008\nDegree of protection\tIEC 60529:2001\nProtection against electrical shock\tUL 61010-1:2012\nAmbient conditions\nAmbient temperature\t-20 ... 60 °C (-4 ... 140 °F)\nextended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 200 g\nDimensions\t20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tCML 17 ATEX 2031X\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC\nEx-Hexagon II (1)D [Ex ia Da] IIIC\nEx-Hexagon I (M1) [Ex ia Ma] I\nInput\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\nSupply\t\nMaximum safe voltage\t250 V (Attention! The rated voltage can be lower.)\nEquipment\tterminals 1+, 3-\nVoltage\t26.2 V\nVoltage\t27.25 V\nCurrent\t93 mA\nPower\t634 mW\nEquipment\tterminals 2-, 3\nVoltage\t30 V\nCurrent\t115 mA\nPower\tmax 1 W\nVoltage\t2 V\nCurrent\t8.5 mA\nPower\t4.3 mW\nEquipment\tterminals 1+, 2 / 3-\nVoltage\t26.2 V\nVoltage\t27.25 V\nCurrent\t115 mA\nPower\t784 mW\nCertificate\tCML 17 ATEX 3030X\nMarking\tEx-Hexagon II 3G Ex ec IIC T4 Gc\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11:2007, voltage peak value 375 V\nInput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11:2007, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012\nInternational approvals\nUL approval\tE106378\nControl drawing\t116-0439 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx CML 17.0016X\nIECEx marking\t[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I\nEx ec IIC T4 Gc", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "20 V", "30 V", "Ex ia Da", "Ex ia Ma", "Ex ia Ga", "V DC supply", "output 4 mA", "20 mA current", "external voltage", "II 3G Ex ec IIC T4", "voltage peak value 375", "insulation voltage 50 V", "electrical isolation acc", "ambient temperature range", "35 mm DIN mounting rail acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 50, "imageuri": "https://productimages.withfloats.com/actual/635e0f910c93040001f7c338.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/635e0f910c93040001f7c338.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T05:45:52.066Z", "updatedon": "2022-10-30T05:45:52.066Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM/products/kfd2-stc5-ex1-2o/50", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": " SMART Transmitter Power Supply", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63f6fd5a8dc9450001cd3666", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "POSITION SWITCH", "description": "Schmersal EX-T4V7H 335-11Y-2138\n\nPOSITION SWITCH, PLASTIC ROLLER LEVER, W/SAFETY FUNCTION, 1NO/NC, SLOW ACTION, METAL BODY, 3XM20 ENTRIES, 24VDC, IP67", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "T4V7H", "24VDC", "SWITCH", "1NO/NC", "Schmersal", "METAL BODY", "SLOW ACTION", "3XM20 ENTRIES", "W/SAFETY FUNCTION", "PLASTIC ROLLER LEVER" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 185, "imageuri": "https://productimages.withfloats.com/actual/63f6fd5fd3b78d00018785bb.", "tileimageuri": "https://productimages.withfloats.com/tile/63f6fd5fd3b78d00018785bb.", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-02-23T05:44:58.696Z", "updatedon": "2025-07-16T06:27:37.071Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/position-switch/185", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SCHMERSAL ", "category": "POSITION SWITCH", "tags": [ "POSITION SWITCH in India", "POSITION SWITCH in Vadodara" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }