Home> Products> real time position control

{ "products": [ { "_id": "63f6fa8a7688aa000154f1d7", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Limit Switch", "description": "SCHMERSAL  AZM170-02ZRK-24VAC/DC\n\n\nLimit Switch, 2NC, 4 A at 230VAC/24VDC, 24 VAC/VDC Coil\n  Safety Interlock Switch with screw terminals for fast installation, 2NC contacts and IDC method of termination. The AZM170 series switch is designed for machines/work cells where access to a hazardous work area must be controlled until safe conditions exist. Their solenoid-latching feature permits locking a machine guard until dangerous conditions, which may exist immediately after removal of power, have abated. Solenoid-latching may be controlled by a time delay, motion detector, position sensor or other suitable component. The unit features independent actuator key (guard) position and solenoid-latching pin position contacts. These permit the prevention of machine restart until the guard is closed and the solenoid-latching pin is in the locked position. The AZM170 consists of an electromechanical safety interlock switch joined to a solenoid latching mechanism. Both the safety switch and solenoid mechanism feature positive break contacts.\n\nCompact design\n\nHighly tamper-resistant\n\nTwo key entry locations\n\nRugged, corrosion-resistant and high-impact GRP housing\n\nBuilt-in manual unlatching release\n\nInterlock with protection against incorrect locking\n\nHigh holding force\n\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "unit", "power", "access", "VAC/DC", "removal", "resistant", "IDC method", "time delay", "protection", "prevention", "termination", "2NC contacts", "230VAC/24VDC", "safety switch", "machine guard", "Compact design", "screw terminals", "machine restart", "motion detector", "safe conditions", "guard) position", "locked position", "position sensor", "DC Limit Switch", "incorrect locking", "fast installation", "SCHMERSAL  AZM170", "solenoid mechanism", "High holding force", "machines/work cells", "hazardous work area", "dangerous conditions", "Two key entry locations", "high-impact GRP housing", "positive break contacts", "The AZM170 series switch", "other suitable component", "independent actuator key", "solenoid-latching feature", "manual unlatching release", "solenoid latching mechanism", "solenoid-latching pin position contacts", "electromechanical safety interlock switch", "24 VAC/VDC Coil   Safety Interlock Switch" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 183, "imageuri": "https://productimages.withfloats.com/actual/63f6fa8e5485af0001f0e13b.webp", "tileimageuri": "https://productimages.withfloats.com/tile/63f6fa8e5485af0001f0e13b.webp", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-02-23T05:32:58.203Z", "updatedon": "2025-07-16T10:18:22.012Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/limit-switch/183", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SCHMERSAL ", "category": "Limit Switch, 2NC, 4 A at 230VAC/24VDC, 24 VAC/VDC Coil", "tags": [ "Limit Switch in India", "Limit Switch supplier in Vadodara" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63da0402921ef400018d86b2", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Safety Interlock Switch", "description": " AZM170-02ZRK-24VAC/DC is a Safety Interlock Switch with screw terminals for fast installation, 2NC contacts and IDC method of termination. The AZM170 series switch is designed for machines/work cells where access to a hazardous work area must be controlled until safe conditions exist. Their solenoid-latching feature permits locking a machine guard until dangerous conditions, which may exist immediately after removal of power, have abated. Solenoid-latching may be controlled by a time delay, motion detector, position sensor or other suitable component. The unit features independent actuator key (guard) position and solenoid-latching pin position contacts. These permit the prevention of machine restart until the guard is closed and the solenoid-latching pin is in the locked position. The AZM170 consists of an electromechanical safety interlock switch joined to a solenoid latching mechanism. Both the safety switch and solenoid mechanism feature positive break contacts.\nCompact design\nHighly tamper-resistant\nTwo key entry locations\nRugged, corrosion-resistant and high-impact GRP housing\nBuilt-in manual unlatching release\nInterlock with protection against incorrect locking\nHigh holding force\nMeets IP67 wash down requirements", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "unit", "IP67", "power", "access", "VAC/DC", "removal", "resistant", "time delay", "protection", "prevention", "IDC method", "termination", "2NC contacts", "requirements", "machine guard", "safety switch", "Compact design", "position sensor", "locked position", "machine restart", "guard) position", "screw terminals", "motion detector", "safe conditions", "incorrect locking", "fast installation", "solenoid mechanism", "High holding force", "machines/work cells", "hazardous work area", "dangerous conditions", "high-impact GRP housing", "positive break contacts", "Two key entry locations", "other suitable component", "independent actuator key", "The AZM170 series switch", "solenoid-latching feature", "manual unlatching release", "solenoid latching mechanism", "solenoid-latching pin position contacts", "electromechanical safety interlock switch" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 156, "imageuri": "https://productimages.withfloats.com/actual/63da0405f09f6c000156f1db.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/63da0405f09f6c000156f1db.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-02-01T06:17:38.486Z", "updatedon": "2025-07-17T04:39:59.346Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/-safety-interlock-switch/156", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SCHMERSAL", "category": "Limit Switch, 2NC, 4 A at 230VAC/24VDC, 24 VAC/VDC Coil", "tags": [ "Safety Interlock Switch in India", "Safety Interlock Switch supplier in Vadodara" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e167ff7b065000156f2f8", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD2-SCD-Ex1", "description": "1-channel isolated barrier\n24 V DC supply (Power Rail)\nCurrent output up to 650 Ω load\nHART I/P and valve positioner\nLead breakage monitoring\nHousing width 12.5 mm\nSIL 2 (SC 3) acc. to IEC/EN 61508\nGeneral specifications\nSignal type\tAnalog output\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSystematic capability (SC)\tSC 3\nSupply\nConnection\tPower Rail or terminals 9+, 10-\nRated voltage\t19 ... 30 V DC\nRipple\t≤ 10 %\nRated current\t≤ 30 mA at 24 V\nPower dissipation\t≤ 600 mW at 20 mA and 500 Ω load\nPower consumption\t≤ 700 mW\nInput\nConnection side\tcontrol side\nConnection\tterminals 5-, 6+\nInput signal\t4 ... 20 mA , limited to approx. 26 mA\nInput voltage\topen loop voltage of the control system < 30 V\nVoltage drop\tapprox. 6 V at 20 mA\nInput resistance\t> 100 kΩ, with field wiring open\nOutput\nConnection side\tfield side\nConnection\tterminals 1+, 2-\nVoltage\t≥ 13 V at 20 mA\nCurrent\t4 ... 20 mA\nLoad\t0 ... 650 Ω\nRipple\t20 mV rms\nTransfer characteristics\nDeviation\tat 20 °C (68 °F), 4 ... 20 mA\n< 0.1 % of full scale, incl. non-linearity and hysteresis\nInfluence of ambient temperature\t< 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F))\nFrequency range\tfield side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)\ncontrol side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)\nRise time\t10 to 90 % ≤ 10 ms\nGalvanic isolation\nInput/Output\tbasic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nInput/power supply\tbasic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nIndicators/settings\nDisplay elements\tLED\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2017\nEN 61326-3-2:2018\nDegree of protection\tIEC 60529\nProtection against electrical shock\tUL 61010-1:2012\nAmbient conditions\nAmbient temperature\t-40 ... 70 °C (-40 ... 158 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tCESI 06 ATEX 021\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC\nEx-Hexagon II (1)D [Ex ia Da] IIIC\nEx-Hexagon I (M1) [Ex ia Ma] I\nOutput\tEx ia\nSupply\t\nMaximum safe voltage\t250 V AC (Attention! Um is no rated voltage.)\nEquipment\tterminals 1+, 2-\nVoltage Uo\t25.2 V\nCurrent Io\t100 mA\nPower Po\t630 mW\nInternal capacitance Ci\t5.7 nF\nInternal inductance Li\tnegligible\nCertificate\tCESI 19 ATEX 021 X\nMarking\tEx-Hexagon II 3G Ex ec IIC T4 Gc\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nOutput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015\nInternational approvals\nFM approval\t\nFM certificate\tFM 18 CA 0116 X , FM 19 US 0117 X\nControl drawing\t116-0469 (cFMus)\nUL approval\tE106378\nControl drawing\t116-0459 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx CES 06.0001X\nIECEx marking\t[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I\nEx ec IIC T4 Gc", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "20 mA", "Ex ia Da", "Ex ia Ga", "Ex ia Ma", "W x H x D", "V DC supply", "Vpp signal 0", "loop voltage", "control side", "x 124 x 114 mm", "II 3G Ex ec IIC T4", "industrial locations", "insulation voltage 300", "voltage peak value 375", "electrical isolation acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 56, "imageuri": "https://productimages.withfloats.com/actual/635e1680c7b01e0001eb363e.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/635e1680c7b01e0001eb363e.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:15:27.102Z", "updatedon": "2022-10-30T06:15:27.102Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM//kcd2-scd-ex1/56", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "SMART Current Driver", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63ec6b5960f89d00016d8e99", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "safety controller", "description": "SCHMERSAL SRB-E-301ST Electronic safety controller, selectable function configuration 103007672\nPart Number: SRB-E-301ST\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "Part Number", "SRB-E-301 ST", "selectable function configuration", "SCHMERSAL SRB-E-301ST Electronic safety controller" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 167, "imageuri": "https://productimages.withfloats.com/actual/63ec6b5ddd41810001670a61.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/63ec6b5ddd41810001670a61.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-02-15T05:19:21.51Z", "updatedon": "2025-07-16T12:19:46.947Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/safety-controller/167", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SCHMERSAL ", "category": "safety controller", "tags": [ "safety controller in India", "safety controller supplier in vadodara" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63d747fa6d13a100019be80a", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "2903145TRIO", "description": "Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 24 V DC/10 A\nTRIO POWER power supplies ? Robust standard functionality\nTRIO POWER 1 AC, 24 V DC\n Space savings in the control cabinet, thanks to the narrow design? Reliable starting of dynamic loads with the dynamic boost, which supplies up to 1.5 times the nominal current for 5 seconds\n High operational reliability, thanks to the robust design\n Wide temperature range from -25?C to +70?C as well as device startup at -40?C (type-tested)\n Maximum availability, thanks to high MTBF (mean time between failure)\nActive function monitoring with DC OK LED and relay contact", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 141, "imageuri": "https://productimages.withfloats.com/actual/63d747fd6448750001b58c5f.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/63d747fd6448750001b58c5f.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-30T04:30:50.486Z", "updatedon": "2023-01-30T04:30:50.486Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/2903145trio/141", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PHOENIX", "category": "TRO", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e191da2024c00014bc31f", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD2-UT2-Ex1", "description": "1-channel isolated barrier\n24 V DC supply (Power Rail)\nThermocouple, RTD, potentiometer or voltage input\nCurrent output 0/4 mA ... 20 mA\nSink or source mode\nConfigurable by PACTware\nLine fault (LFD) and sensor burnout detection\nUp to SIL 2 acc. to IEC 61508/IEC 61511\nGeneral specifications\nSignal type\tAnalog input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSupply\nConnection\tterminals 9+, 10- or power feed module/Power Rail\nRated voltage\t19 ... 30 V DC\nRipple\twithin the supply tolerance\nPower dissipation\t≤ 0.98 W\nPower consumption\tmax. 0.98 W\nInterface\nProgramming interface\tprogramming socket\nInput\nConnection side\tfield side\nConnection\tterminals 1, 2, 3, 4\nRTD\ttype Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995)\ntype Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94)\ntype Cu10, Cu50, Cu100 (P50353-92)\ntype Ni100 (DIN 43760)\nMeasuring current\tapprox. 200 µA with RTD\nTypes of measuring\t2-, 3-, 4-wire connection\nLead resistance\tmax. 50 Ω per line\nMeasurement loop monitoring\tsensor breakage, sensor short-circuit\nThermocouples\ttype B, E, J, K, N, R, S, T (IEC 584-1: 1995)\ntype L (DIN 43710: 1985)\ntype TXK, TXKH, TXA (P8.585-2001)\nCold junction compensation\texternal and internal\nMeasurement loop monitoring\tsensor breakage\nPotentiometer\t0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection)\nVoltage\tselectable within the range -100 ... 100 mV\nInput resistance\t≥ 1 MΩ (-100 ... 100 mV)\nOutput\nConnection side\tcontrol side\nConnection\tterminal 5: source (-), terminal 6: source (+), terminal 7: sink(-), terminal 8: sink (+)\nOutput\tAnalog current output\nCurrent range\t0 ... 20 mA or 4 ... 20 mA\nFault signal\tdownscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43)\nSource\tload 0 ... 550 Ω\nopen-circuit voltage ≤ 18 V\nSink\tVoltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V,\nseries resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage.\nThe maximum value of the resistance is (V - 5)/0.0215 Ω.\nTransfer characteristics\nDeviation\t\nAfter calibration\tPt100: ± (0.06 % of measurement value in K + 0.1 % of span + 0.1 K (4-wire connection))\nthermocouple: ± (0.05 % of measurement value in °C + 0.1 % of span + 1.5 K (1.7 K for types R and S)) , includes ± 1.3 K fault of the cold junction compensation (CJC)\nmV: ± (50 µV + 0.1 % of span)\npotentiometer: ± (0.05 % of full scale + 0.1 % of span, (excludes faults due to lead resistance))\nInfluence of ambient temperature\tPt100: ± (0.0015 % of measurement value in K + 0.006 % of span)/K ΔTamb*)\nthermocouple: ± (0.02 K + 0.005 % of measurement value in °C + 0.006 % of span)/K ΔTamb*)), influence of cold junction compensation (CJC) included\nmV: ± (0.01 % of measurement value + 0.006 % of span)/K ΔTamb*)\npotentiometer: ± 0.006 % of span/K ΔTamb*)\n*) ΔTamb = ambient temperature change referenced to 23 °C (296 K)\nInfluence of supply voltage\t< 0.01 % of span\nInfluence of load\t≤ 0.001 % of output value per 100 Ω\nReaction time\tworst case value (sensor breakage and/or sensor short circuit detection enabled)\nmV: 1 s, thermocouples with CJC: 1.1 s, thermocouples with fixed reference temperature: 1.1 s, 3- or 4-wire RTD: 920 ms, 2-wire RTD: 800 ms, Potentiometer: 2.05 s\nGalvanic isolation\nOutput/supply, programming input\tfunctional insulation, rated insulation voltage 50 V AC\nThere is no electrical isolation between the programming input and the supply.\nThe programming cable provides galvanic isolation so that ground loops are avoided.\nIndicators/settings\nDisplay elements\tLEDs\nConfiguration\tvia PACTware\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2012\nEN 61326-3-2:2008\nDegree of protection\tIEC 60529:2001\nProtection against electrical shock\tUL 61010-1:2004\nAmbient conditions\nAmbient temperature\t-20 ... 70 °C (-4 ... 158 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tBASEEFA 13 ATEX 0102 X\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC , Ex-Hexagon II (1)D [Ex ia Da] IIIC , Ex-Hexagon I (M1) [Ex ia Ma] I\nInput\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\nInputs\tterminals 1, 2, 3, 4\nVoltage Uo\t9 V\nCurrent Io\t13.1 mA\nPower Po\t30 mW\nAnalog outputs, power supply, collective error\t\nMaximum safe voltage\t250 V (Attention! This is not the rated voltage.)\nInterface\t\nMaximum safe voltage\t250 V (Attention! The rated voltage is lower.), RS 232\nCertificate\tBASEEFA 13 ATEX 0103 X\nMarking\tEx-Hexagon II 3G Ex nA II T4 Gc [device in zone 2]\nGalvanic isolation\t\nInput/Other circuits\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010\nInternational approvals\nUL approval\t\nControl drawing\t116-0379 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx BAS 13.0057X\nIECEx marking\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "1 s", "Ex ia Da", "Ex ia Ma", "Ex ia Ga", "V DC supply", "output value", "x 119 x 114 mm", "measurement value", "reference temperature", "voltage peak value 375", "insulation voltage 50 V", "electrical isolation acc", "cold junction compensation", "ambient temperature change", "sensor short circuit detection" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 59, "imageuri": "https://productimages.withfloats.com/actual/635e191fe52a05000198be38.png", "tileimageuri": "https://productimages.withfloats.com/tile/635e191fe52a05000198be38.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:26:37.668Z", "updatedon": "2022-10-30T06:26:37.668Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/kcd2-ut2-ex1/59", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "Universal Temperature Converter", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e110bf7c0e00001ca7e77", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD2-STC-Ex1.2O", "description": "1-channel isolated barrier\n24 V DC supply (Power Rail)\nInput for 2-wire SMART transmitters and current sources\nSignal splitter (1 input and 2 outputs)\nDual output 0/4 mA ... 20 mA or 0/1 V ... 5 V\nTerminal blocks with test sockets\nSIL 2 (SC 3) acc. to IEC/EN 61508\nGeneral specifications\nSignal type\tAnalog input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSystematic capability (SC)\tSC 3\nSupply\nConnection\tPower Rail or terminals 9+, 10-\nRated voltage\t19 ... 30 V DC\nRipple\twithin the supply tolerance\nPower dissipation\tapprox. 1.4 W at 20 mA transfer current, 250 Ω in both outputs\nPower consumption\t2 W\nInput\nConnection side\tfield side\nConnection\tterminals 1+, 2- (sink); 3+, 4- (source)\nInput signal\t0/4 ... 20 mA\nVoltage drop\tterminals 3, 4: ≤ 6.1 V at 20 mA\nShort-circuit current\tterminals 1+, 2-: 25 mA\nInput resistance\tterminals 1+, 2-: max. 500 Ω (BRAIN)\n(250 Ω load)\nAvailable voltage\tterminals 1+, 2-: ≥ 16 V at 20 mA , ≥ 18.5 V at 4 mA\nOutput\nConnection side\tcontrol side\nConnection\tsource: terminals 5-, 6+; 7-, 8+\nsink: terminals 5+, 6-, 7+, 8-\nLoad\tchannel 1: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V)\nchannel 2: 0 ... 500 Ω (20 mA)/> 1 MΩ (5 V)\nOutput signal\t0/4 ... 20 mA or 0/1 ... 5 V\nRipple\tmax. 50 µA rms\nTransfer characteristics\nDeviation\tIout < 20 µA (0.1 %); Vout < 10 mV (0.2 %) incl. calibration, linearity, hysteresis and fluctuation of supply voltage, at 20 °C (68 °F), 0/4 ... 20 mA, 0/1 ... 5 V\nInfluence of ambient temperature\tcurrent output: 0.25 µA/K\nvoltage output: 80 µV/K\nFrequency range\tfield side into the control side: bandwidth with 0.5 Vpp signal 0 ... 6 kHz (-3 dB)\ncontrol side into the field side: bandwidth with 0.5 Vpp signal 0.3 ... 6 kHz (-3 dB)\nSettling time\t6 ms\nRise time/fall time\t2 ms\nGalvanic isolation\nOutput/power supply\tfunctional insulation, rated insulation voltage 50 V AC\nOutput/Output\tfunctional insulation, rated insulation voltage 50 V AC\nIndicators/settings\nDisplay elements\tLED\nControl elements\tDIP switch\nConfiguration\tvia DIP switches\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2012\nEN 61326-3-2:2008\nDegree of protection\tIEC 60529:2001\nProtection against electrical shock\tUL 61010-1:2012\nAmbient conditions\nAmbient temperature\t-20 ... 60 °C (-4 ... 140 °F)\nextended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tBASEEFA 13 ATEX 0077 X\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC\nEx-Hexagon II (1)D [Ex ia Da] IIIC\nEx-Hexagon I (M1) [Ex ia Ma] I\nInput\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\nSupply\t\nMaximum safe voltage\t250 V (Attention! The rated voltage can be lower.)\nEquipment\tterminals 1+, 2-\nVoltage\t25.2 V\nVoltage\t28.2 V\nCurrent\t93 mA\nPower\t656 mW\nInternal capacitance\t10 nF\nInternal inductance\t0 mH\nEquipment\tterminals 3+, 4-\nVoltage\t30 V\nCurrent\t115 mA\nPower\t700 mW\nVoltage\t5 V\nCurrent\t6.8 mA\nPower\t1.6 mW\nOutput\t\nMaximum safe voltage\t250 V (Attention! The rated voltage can be lower.)\nCertificate\tBASEEFA 13 ATEX 0078 X\nMarking\tEx-Hexagon II 3G Ex nA II T4 Gc [device in zone 2]\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nInput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010\nInternational approvals\nUL approval\t\nControl drawing\t116-0380 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx BAS 13.0043X\nIECEx marking\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "5 V", "1 input", "Ex ia Da", "Ex ia Ma", "Ex ia Ga", "V DC supply", "Vpp signal 0", "supply voltage", "20 mA transfer current", "voltage peak value 375", "insulation voltage 50 V", "electrical isolation acc", "ambient temperature range", "35 mm DIN mounting rail acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 51, "imageuri": "https://productimages.withfloats.com/actual/635e110be52a05000198bd1d.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/635e110be52a05000198bd1d.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T05:52:11.653Z", "updatedon": "2022-10-30T05:52:11.653Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM//kcd2-stc-ex1-2o/51", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": " SMART Transmitter Power Supply", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e0f90f7c0e00001ca7e6f", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KFD2-STC5-Ex1.2O", "description": "\n1-channel isolated barrier\n24 V DC supply (Power Rail)\nInput 2-wire and 3-wire SMART transmitters and 2-wire SMART current sources\nSignal splitter (1 input and 2 outputs)\nDual output 4 mA ... 20 mA current sink/current source\nTerminals with test points\nSIL 2 (SC 3) acc. to IEC/EN 61508\nGeneral specifications\nSignal type\tAnalog input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSystematic capability (SC)\tSC 3\nSupply\nConnection\tPower Rail or terminals 14+, 15-\nRated voltage\t18 ... 30 V DC\nRipple\twithin the supply tolerance\nPower dissipation\t≤ 1 W at maximum load\nPower consumption\t≤ 1.7 W at maximum load\nInput\nConnection side\tfield side\nConnection\tterminals 1+, 2-, 3\nInput signal\t4 ... 20 mA\nOpen circuit voltage/short-circuit current\tterminals 1+, 3: 23 V / 25 mA\nInput resistance\tmax. 265 Ω terminals 2-, 3 , max. 330 Ω terminals 1+, 3\nAvailable voltage\t≥ 16 V at 20 mA ; ≥ 20 V at 4 mA , terminals 1+, 3\nOutput\nConnection side\tcontrol side\nConnection\tterminals 7+, 8-, 9-; 10+, 11-, 12- (sink)\nterminals 7-, 8+, 9+; 10-, 11+, 12+ (source)\nsee additional information\nLoad\t0 ... 600 Ω\nOutput signal\t4 ... 20 mA (overload > 25 mA)\nRipple\tmax. 50 µA rms\nExternal supply (loop)\t2 ... 30 V DC\nIf the external voltage is > 19 V, a load ≥ ((V - 19) / 0.02) Ω is required. V represents the value of the external voltage.\nThe internal 250 Ω resistor at terminals 9 and 12 can be used as a load.\nTransfer characteristics\nDeviation\tat 20 °C (68 °F), 4 ... 20 mA\n≤ 10 µA incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage\nInfluence of ambient temperature\t≤ 0.25 µA/K\nFrequency range\tfield side into the control side: bandwidth with 0.5 Vpp signal 0 ... 7.5 kHz (-3 dB)\ncontrol side into the field side: bandwidth with 0.5 Vpp signal 0.3 ... 7.5 kHz (-3 dB)\nSettling time\t200 µs\nRise time/fall time\t100 µs\nGalvanic isolation\nOutput/power supply\tfunctional insulation, rated insulation voltage 50 V AC\nOutput/Output\tfunctional insulation, rated insulation voltage 50 V AC\nIndicators/settings\nDisplay elements\tLED\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2012\nEN 61326-3-2:2008\nDegree of protection\tIEC 60529:2001\nProtection against electrical shock\tUL 61010-1:2012\nAmbient conditions\nAmbient temperature\t-20 ... 60 °C (-4 ... 140 °F)\nextended ambient temperature range up to 70 °C (158 °F), refer to manual for necessary mounting conditions\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 200 g\nDimensions\t20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) (W x H x D) , housing type B2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tCML 17 ATEX 2031X\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC\nEx-Hexagon II (1)D [Ex ia Da] IIIC\nEx-Hexagon I (M1) [Ex ia Ma] I\nInput\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\nSupply\t\nMaximum safe voltage\t250 V (Attention! The rated voltage can be lower.)\nEquipment\tterminals 1+, 3-\nVoltage\t26.2 V\nVoltage\t27.25 V\nCurrent\t93 mA\nPower\t634 mW\nEquipment\tterminals 2-, 3\nVoltage\t30 V\nCurrent\t115 mA\nPower\tmax 1 W\nVoltage\t2 V\nCurrent\t8.5 mA\nPower\t4.3 mW\nEquipment\tterminals 1+, 2 / 3-\nVoltage\t26.2 V\nVoltage\t27.25 V\nCurrent\t115 mA\nPower\t784 mW\nCertificate\tCML 17 ATEX 3030X\nMarking\tEx-Hexagon II 3G Ex ec IIC T4 Gc\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11:2007, voltage peak value 375 V\nInput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11:2007, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN IEC 60079-0:2018+AC:2020 , EN 60079-7:2015+A1:2018 , EN 60079-11:2012\nInternational approvals\nUL approval\tE106378\nControl drawing\t116-0439 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx CML 17.0016X\nIECEx marking\t[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I\nEx ec IIC T4 Gc", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "20 V", "30 V", "Ex ia Da", "Ex ia Ma", "Ex ia Ga", "V DC supply", "output 4 mA", "20 mA current", "external voltage", "II 3G Ex ec IIC T4", "voltage peak value 375", "insulation voltage 50 V", "electrical isolation acc", "ambient temperature range", "35 mm DIN mounting rail acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 50, "imageuri": "https://productimages.withfloats.com/actual/635e0f910c93040001f7c338.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/635e0f910c93040001f7c338.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T05:45:52.066Z", "updatedon": "2022-10-30T05:45:52.066Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM/products/kfd2-stc5-ex1-2o/50", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": " SMART Transmitter Power Supply", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e0b9544ad890001abb9fc", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD2-STC-Ex1", "description": "1-channel isolated barrier\n24 V DC supply (Power Rail)\nInput for 2-wire SMART transmitters and current sources\nOutput for 4 mA ... 20 mA or 1 V ... 5 V\nHousing width 12.5 mm\nSIL 2 (SC 3) acc. to IEC/EN 61508\n\nGeneral specifications\nSignal type\tAnalog input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSystematic capability (SC)\tSC 3\nSupply\nConnection\tPower Rail or terminals 9+, 10-\nRated voltage\t19 ... 30 V DC\nRipple\t≤ 10 %\nRated current\t≤ 45 mA at 24 V and 20 mA source mode output\nPower dissipation\t≤ 800 mW\nPower consumption\t≤ 1.1 W\nInput\nConnection side\tfield side\nConnection\tterminals 1+, 2-; 3+, 4-\nInput signal\t4 ... 20 mA limited to approx. 26 mA\nOpen circuit voltage/short-circuit current\tterminals 1+, 2-: 22 V / 26 mA\nVoltage drop\tterminals 3+, 4- : approx. 5 V\nAvailable voltage\tterminals 1+, 2-: ≥ 15 V at 20 mA ; ≥ 18 V at 4 mA\nOutput\nConnection side\tcontrol side\nConnection\tterminals 5-, 6+\nterminals 5-, 8+ for HART resistor\nLoad\t0 ... 350 Ω (source mode)\nOutput signal\t4 ... 20 mA or 1 ... 5 V (on 250 Ω, 0.1 % internal shunt)\n4 ... 20 mA (sink mode), operating voltage 10 ... 30 V\nRipple\t20 mV rms\nTransfer characteristics\nDeviation\tat 20 °C (68 °F)\n< 0.1 % of full scale, incl. non-linearity and hysteresis (source mode and sink mode 4 ... 20 mA)\n≤ ± 0.2 % incl. non-linearity and hysteresis (source mode 1 ... 5 V)\nInfluence of ambient temperature\t< 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F)) (source mode and sink mode 4 ... 20mA)\n< 0.5 mV/K (-20 ... 70 °C (-4 ... 158 °F)); < 1 mV/K (-40 ... -20 °C (-40 ... -4 °F)) (source mode 1...5 V)\nFrequency range\tfield side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)\ncontrol side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)\nSettling time\t≤ 50 ms\nRise time/fall time\t≤ 10 ms\nGalvanic isolation\nInput/Output\tbasic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nInput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/power supply\tbasic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nIndicators/settings\nDisplay elements\tLED\nControl elements\tDIP switch\nConfiguration\tvia DIP switches\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2017\nEN 61326-3-2:2018\nDegree of protection\tIEC 60529:2001\nProtection against electrical shock\tUL 61010-1:2012\nAmbient conditions\nAmbient temperature\t-40 ... 70 °C (-40 ... 158 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tCESI 06 ATEX 021\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC\nEx-Hexagon II (1)D [Ex ia Da] IIIC\nEx-Hexagon I (M1) [Ex ia Ma] I\nInput\tEx ia\nSupply\t\nMaximum safe voltage\t250 V AC (Attention! Um is no rated voltage.)\nEquipment\tterminals 1+, 2-\nVoltage\t25.2 V\nCurrent\t100 mA\nPower\t630 mW\nInternal capacitance\t5.7 nF\nInternal inductance\tnegligible\nEquipment\tterminals 3+, 4-\nVoltage\t30 V\nCurrent\t128 mA\nVoltage\t7.2 V\nCurrent\t100 mA\nPower\t25 mW\nInternal capacitance\t5.7 nF\nInternal inductance\tnegligible\nCertificate\tCESI 19 ATEX 021 X\nMarking\tEx-Hexagon II 3G Ex ec IIC T4 Gc\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nInput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015\nInternational approvals\nFM approval\t\nFM certificate\tFM 18 CA 0116 X , FM 19 US 0117 X\nControl drawing\t116-0469 (cFMus)\nUL approval\tE106378\nControl drawing\t116-0459 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx CES 06.0001X\nIECEx marking\t[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I\nEx ec IIC T4 Gc", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "1 V", "5 V", "4 mA", "mode 4", "V DC supply", "Vpp signal 0", "source mode 1", "20 mA source mode", "II 3G Ex ec IIC T4", "operating voltage 10", "insulation voltage 300", "voltage peak value 375", "electrical isolation acc", "SMART Transmitter Power Supply" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 49, "imageuri": "https://productimages.withfloats.com/actual/635e0b97bb77e100018dfb6c.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/635e0b97bb77e100018dfb6c.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T05:28:53.901Z", "updatedon": "2022-10-30T05:36:42.667Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM/products/kcd2-stc-ex1/49", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "SMART Transmitter Power Supply", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }