Home> Products> time delay

{ "products": [ { "_id": "63f6fa8a7688aa000154f1d7", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Limit Switch", "description": "SCHMERSAL  AZM170-02ZRK-24VAC/DC\n\n\nLimit Switch, 2NC, 4 A at 230VAC/24VDC, 24 VAC/VDC Coil\n  Safety Interlock Switch with screw terminals for fast installation, 2NC contacts and IDC method of termination. The AZM170 series switch is designed for machines/work cells where access to a hazardous work area must be controlled until safe conditions exist. Their solenoid-latching feature permits locking a machine guard until dangerous conditions, which may exist immediately after removal of power, have abated. Solenoid-latching may be controlled by a time delay, motion detector, position sensor or other suitable component. The unit features independent actuator key (guard) position and solenoid-latching pin position contacts. These permit the prevention of machine restart until the guard is closed and the solenoid-latching pin is in the locked position. The AZM170 consists of an electromechanical safety interlock switch joined to a solenoid latching mechanism. Both the safety switch and solenoid mechanism feature positive break contacts.\n\nCompact design\n\nHighly tamper-resistant\n\nTwo key entry locations\n\nRugged, corrosion-resistant and high-impact GRP housing\n\nBuilt-in manual unlatching release\n\nInterlock with protection against incorrect locking\n\nHigh holding force\n\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "unit", "power", "access", "VAC/DC", "removal", "resistant", "IDC method", "time delay", "protection", "prevention", "termination", "2NC contacts", "230VAC/24VDC", "safety switch", "machine guard", "Compact design", "screw terminals", "machine restart", "motion detector", "safe conditions", "guard) position", "locked position", "position sensor", "DC Limit Switch", "incorrect locking", "fast installation", "SCHMERSAL  AZM170", "solenoid mechanism", "High holding force", "machines/work cells", "hazardous work area", "dangerous conditions", "Two key entry locations", "high-impact GRP housing", "positive break contacts", "The AZM170 series switch", "other suitable component", "independent actuator key", "solenoid-latching feature", "manual unlatching release", "solenoid latching mechanism", "solenoid-latching pin position contacts", "electromechanical safety interlock switch", "24 VAC/VDC Coil   Safety Interlock Switch" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 183, "imageuri": "https://productimages.withfloats.com/actual/63f6fa8e5485af0001f0e13b.webp", "tileimageuri": "https://productimages.withfloats.com/tile/63f6fa8e5485af0001f0e13b.webp", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-02-23T05:32:58.203Z", "updatedon": "2025-07-16T10:18:22.012Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/limit-switch/183", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SCHMERSAL ", "category": "Limit Switch, 2NC, 4 A at 230VAC/24VDC, 24 VAC/VDC Coil", "tags": [ "Limit Switch in India", "Limit Switch supplier in Vadodara" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63da0402921ef400018d86b2", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": " Safety Interlock Switch", "description": " AZM170-02ZRK-24VAC/DC is a Safety Interlock Switch with screw terminals for fast installation, 2NC contacts and IDC method of termination. The AZM170 series switch is designed for machines/work cells where access to a hazardous work area must be controlled until safe conditions exist. Their solenoid-latching feature permits locking a machine guard until dangerous conditions, which may exist immediately after removal of power, have abated. Solenoid-latching may be controlled by a time delay, motion detector, position sensor or other suitable component. The unit features independent actuator key (guard) position and solenoid-latching pin position contacts. These permit the prevention of machine restart until the guard is closed and the solenoid-latching pin is in the locked position. The AZM170 consists of an electromechanical safety interlock switch joined to a solenoid latching mechanism. Both the safety switch and solenoid mechanism feature positive break contacts.\nCompact design\nHighly tamper-resistant\nTwo key entry locations\nRugged, corrosion-resistant and high-impact GRP housing\nBuilt-in manual unlatching release\nInterlock with protection against incorrect locking\nHigh holding force\nMeets IP67 wash down requirements", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "unit", "IP67", "power", "access", "VAC/DC", "removal", "resistant", "time delay", "protection", "prevention", "IDC method", "termination", "2NC contacts", "requirements", "machine guard", "safety switch", "Compact design", "position sensor", "locked position", "machine restart", "guard) position", "screw terminals", "motion detector", "safe conditions", "incorrect locking", "fast installation", "solenoid mechanism", "High holding force", "machines/work cells", "hazardous work area", "dangerous conditions", "high-impact GRP housing", "positive break contacts", "Two key entry locations", "other suitable component", "independent actuator key", "The AZM170 series switch", "solenoid-latching feature", "manual unlatching release", "solenoid latching mechanism", "solenoid-latching pin position contacts", "electromechanical safety interlock switch" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 156, "imageuri": "https://productimages.withfloats.com/actual/63da0405f09f6c000156f1db.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/63da0405f09f6c000156f1db.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-02-01T06:17:38.486Z", "updatedon": "2025-07-17T04:39:59.346Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/-safety-interlock-switch/156", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "SCHMERSAL", "category": "Limit Switch, 2NC, 4 A at 230VAC/24VDC, 24 VAC/VDC Coil", "tags": [ "Safety Interlock Switch in India", "Safety Interlock Switch supplier in Vadodara" ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63d747fa6d13a100019be80a", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "2903145TRIO", "description": "Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 1-phase, output: 24 V DC/10 A\nTRIO POWER power supplies ? Robust standard functionality\nTRIO POWER 1 AC, 24 V DC\n Space savings in the control cabinet, thanks to the narrow design? Reliable starting of dynamic loads with the dynamic boost, which supplies up to 1.5 times the nominal current for 5 seconds\n High operational reliability, thanks to the robust design\n Wide temperature range from -25?C to +70?C as well as device startup at -40?C (type-tested)\n Maximum availability, thanks to high MTBF (mean time between failure)\nActive function monitoring with DC OK LED and relay contact", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": null, "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 141, "imageuri": "https://productimages.withfloats.com/actual/63d747fd6448750001b58c5f.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/63d747fd6448750001b58c5f.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2023-01-30T04:30:50.486Z", "updatedon": "2023-01-30T04:30:50.486Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM/products/2903145trio/141", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PHOENIX", "category": "TRO", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "6385a6ebbafdf900017eeba7", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "PS/1AC/24VDC/240W/EE (P2910587)", "description": "Input data\n\nNominal input voltage range100 V AC ... 240 V ACInput voltage range85 V AC ... 264 V ACAC frequency range47 Hz ... 63 HzDischarge current to PE< 1 mA (264 V AC)Current consumption2.8 A (115 V AC)1.4 A (230 V AC)Inrush surge currenttyp. 20 A (115 V AC)typ. 40 A (230 V AC)Mains bufferingtyp. 10 ms (115 V AC)typ. 16 ms (230 V AC)Input fuse6.3 A (slow-blow, internal)Type of protectionTransient surge protectionProtective circuit/componentVaristor\n\nOutput data\n\nNominal output voltage24 V DC ±2 %Setting range of the output voltage (USet)22 V DC ... 28 V DC (max. power ≤ 240 W)Nominal output current (IN)10 ADerating> 40 °C (1.67 % / °C, 115 V AC)> 50 °C (2.5 % / °C, 230 V AC)Max. capacitive load8000 μFActive current limitation105% - 150% of the max. output power (in the event of short circuit)Residual ripple< 120 mVPP(-10 °C ... +70 °C)< 240 mVPP(-20 °C ... -10 °C)Output power240 WTypical response time1000 msMaximum power dissipation in no-load condition4.62 W (115 V AC)2.14 W (230 V AC)Power loss nominal load max.31.53 W (115 V AC)25.44 W (230 V AC\n\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "28 V DC", "22 V DC", "115 V AC", "230 V AC", "output voltage24 V DC", "current limitation105", "Nominal output current", "63 HzDischarge current", "Power loss nominal load", "input voltage range100 V AC", "264 V ACAC frequency range47 Hz", "240 V ACInput voltage range85 V AC", "protectionTransient surge protectionProtective", "WTypical response time1000 msMaximum power dissipation" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 92, "imageuri": "https://productimages.withfloats.com/actual/6385a6edef78990001f29511.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/6385a6edef78990001f29511.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-11-29T06:30:03.623Z", "updatedon": "2022-11-29T06:30:03.623Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM//ps-1ac-24vdc-240w-ee-p2910587-/92", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "Phoenix ", "category": "Phoenix ", "tags": [ "PS/1AC/24VDC/240W/EE (P2910587) In Vadodara ", "PS/1AC/24VDC/240W/EE (P2910587) In India " ], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "63750d6ec3b5020001400d30", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "Managed Ethernet switch", "description": "Managed Ethernet switch with six RJ45 ports at 10/100 Mbps, two SC format fiber optic ports\r\nand an operating temperature of -40°C ... +75°C\n\nProduct Description\r\nFL SWITCH 3000 managed industrial Ethernet switches combine extensive network performance and securtiy features with complete IEEE\r\nredundancy (STP/RSTP/MST) and 15 ms recovery time extended ring redundancy. Unique web customization provides a simplified user interface\r\nfor today's applications and scalable functionality for future needs. A comprehensive mix of fiber optic and copper port connections meets a wide\r\nrange of applications.\r\nYour advantages\r\n• -40 to 75°C and -10 to 60°C ambient temperature versions\r\n• RJ45 ports support a transmission speed of 10/100 Mbps\r\n• Fiber-optic ports support 100 Mbps\r\n• Secure web-based and SNMP-based management\r\n• Extensive web diagnostics with configurable LED and remote alarm contacts\r\n• Security options with cable locking\r\n• Unique cleanup function hides unused configuration pages, reducing complexity, maintenance and startup times\r\n• Auto negotiation and autocrossing detection simplifies installation and setup\n\n", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 0, "_keywords": [ "six RJ45 ports", "Managed Ethernet", "Security options", "comprehensive mix", "RJ45 ports support", "ambient temperature", "detection simplifies", "scalable functionality", "Unique web customization", "Extensive web diagnostics", "industrial Ethernet switches", "copper port connections meets", "extensive network performance", "Unique cleanup function hides unused configuration pages" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 77, "imageuri": "https://productimages.withfloats.com/actual/63750d7374fc8a0001d95e6b.", "tileimageuri": "https://productimages.withfloats.com/tile/63750d7374fc8a0001d95e6b.", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-11-16T16:18:54.172Z", "updatedon": "2022-11-16T16:18:54.172Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM//managed-ethernet-switch/77", "availableunits": -1.0, "iscodavailable": true, "isprepaidonlineavailable": true, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "", "category": "Ethernet Switch ", "tags": [], "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": null, "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e191da2024c00014bc31f", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD2-UT2-Ex1", "description": "1-channel isolated barrier\n24 V DC supply (Power Rail)\nThermocouple, RTD, potentiometer or voltage input\nCurrent output 0/4 mA ... 20 mA\nSink or source mode\nConfigurable by PACTware\nLine fault (LFD) and sensor burnout detection\nUp to SIL 2 acc. to IEC 61508/IEC 61511\nGeneral specifications\nSignal type\tAnalog input\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSupply\nConnection\tterminals 9+, 10- or power feed module/Power Rail\nRated voltage\t19 ... 30 V DC\nRipple\twithin the supply tolerance\nPower dissipation\t≤ 0.98 W\nPower consumption\tmax. 0.98 W\nInterface\nProgramming interface\tprogramming socket\nInput\nConnection side\tfield side\nConnection\tterminals 1, 2, 3, 4\nRTD\ttype Pt10, Pt50, Pt100, Pt500, Pt1000 (EN 60751: 1995)\ntype Pt10GOST, Pt50GOST, Pt100GOST, Pt500GOST, Pt1000GOST (6651-94)\ntype Cu10, Cu50, Cu100 (P50353-92)\ntype Ni100 (DIN 43760)\nMeasuring current\tapprox. 200 µA with RTD\nTypes of measuring\t2-, 3-, 4-wire connection\nLead resistance\tmax. 50 Ω per line\nMeasurement loop monitoring\tsensor breakage, sensor short-circuit\nThermocouples\ttype B, E, J, K, N, R, S, T (IEC 584-1: 1995)\ntype L (DIN 43710: 1985)\ntype TXK, TXKH, TXA (P8.585-2001)\nCold junction compensation\texternal and internal\nMeasurement loop monitoring\tsensor breakage\nPotentiometer\t0 ... 20 kΩ (2-wire connection), 0.8 ... 20 kΩ (3-wire connection)\nVoltage\tselectable within the range -100 ... 100 mV\nInput resistance\t≥ 1 MΩ (-100 ... 100 mV)\nOutput\nConnection side\tcontrol side\nConnection\tterminal 5: source (-), terminal 6: source (+), terminal 7: sink(-), terminal 8: sink (+)\nOutput\tAnalog current output\nCurrent range\t0 ... 20 mA or 4 ... 20 mA\nFault signal\tdownscale 0 or 2 mA, upscale 21.5 mA (acc. NAMUR NE43)\nSource\tload 0 ... 550 Ω\nopen-circuit voltage ≤ 18 V\nSink\tVoltage across terminals 5 ... 30 V. If the current is supplied from a source > 16.5 V,\nseries resistance of ≥ (V - 16.5)/0.0215 Ω is needed, where V is the source voltage.\nThe maximum value of the resistance is (V - 5)/0.0215 Ω.\nTransfer characteristics\nDeviation\t\nAfter calibration\tPt100: ± (0.06 % of measurement value in K + 0.1 % of span + 0.1 K (4-wire connection))\nthermocouple: ± (0.05 % of measurement value in °C + 0.1 % of span + 1.5 K (1.7 K for types R and S)) , includes ± 1.3 K fault of the cold junction compensation (CJC)\nmV: ± (50 µV + 0.1 % of span)\npotentiometer: ± (0.05 % of full scale + 0.1 % of span, (excludes faults due to lead resistance))\nInfluence of ambient temperature\tPt100: ± (0.0015 % of measurement value in K + 0.006 % of span)/K ΔTamb*)\nthermocouple: ± (0.02 K + 0.005 % of measurement value in °C + 0.006 % of span)/K ΔTamb*)), influence of cold junction compensation (CJC) included\nmV: ± (0.01 % of measurement value + 0.006 % of span)/K ΔTamb*)\npotentiometer: ± 0.006 % of span/K ΔTamb*)\n*) ΔTamb = ambient temperature change referenced to 23 °C (296 K)\nInfluence of supply voltage\t< 0.01 % of span\nInfluence of load\t≤ 0.001 % of output value per 100 Ω\nReaction time\tworst case value (sensor breakage and/or sensor short circuit detection enabled)\nmV: 1 s, thermocouples with CJC: 1.1 s, thermocouples with fixed reference temperature: 1.1 s, 3- or 4-wire RTD: 920 ms, 2-wire RTD: 800 ms, Potentiometer: 2.05 s\nGalvanic isolation\nOutput/supply, programming input\tfunctional insulation, rated insulation voltage 50 V AC\nThere is no electrical isolation between the programming input and the supply.\nThe programming cable provides galvanic isolation so that ground loops are avoided.\nIndicators/settings\nDisplay elements\tLEDs\nConfiguration\tvia PACTware\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2012\nEN 61326-3-2:2008\nDegree of protection\tIEC 60529:2001\nProtection against electrical shock\tUL 61010-1:2004\nAmbient conditions\nAmbient temperature\t-20 ... 70 °C (-4 ... 158 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tBASEEFA 13 ATEX 0102 X\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC , Ex-Hexagon II (1)D [Ex ia Da] IIIC , Ex-Hexagon I (M1) [Ex ia Ma] I\nInput\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\nInputs\tterminals 1, 2, 3, 4\nVoltage Uo\t9 V\nCurrent Io\t13.1 mA\nPower Po\t30 mW\nAnalog outputs, power supply, collective error\t\nMaximum safe voltage\t250 V (Attention! This is not the rated voltage.)\nInterface\t\nMaximum safe voltage\t250 V (Attention! The rated voltage is lower.), RS 232\nCertificate\tBASEEFA 13 ATEX 0103 X\nMarking\tEx-Hexagon II 3G Ex nA II T4 Gc [device in zone 2]\nGalvanic isolation\t\nInput/Other circuits\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010\nInternational approvals\nUL approval\t\nControl drawing\t116-0379 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx BAS 13.0057X\nIECEx marking\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "1 s", "Ex ia Da", "Ex ia Ma", "Ex ia Ga", "V DC supply", "output value", "x 119 x 114 mm", "measurement value", "reference temperature", "voltage peak value 375", "insulation voltage 50 V", "electrical isolation acc", "cold junction compensation", "ambient temperature change", "sensor short circuit detection" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 59, "imageuri": "https://productimages.withfloats.com/actual/635e191fe52a05000198be38.png", "tileimageuri": "https://productimages.withfloats.com/tile/635e191fe52a05000198be38.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:26:37.668Z", "updatedon": "2022-10-30T06:26:37.668Z", "buyonlinelink": null, "producturl": "http://WWW.LADDERLOGIXINDIA.COM//kcd2-ut2-ex1/59", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "Universal Temperature Converter", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e183744ad890001abba3f", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KFD2-EB2.R4A.B", "description": "Interface for Power Rail\nUsed for redundant configuration\nSupply current ≤ 4 A\nReplaceable fuse\nRelay contact output, reversible\nLED status indication\nSupply\nConnection\tterminals 11+, 12-\nterminals 8+, 9-\nRated voltage\t20 ... 30 V DC\nThe maximum rated operating voltage of the devices plugged onto the Power Rail must not be exceeded.\nFusing\t5 AT/250 V AC\nrecommended maximum utilization of the fuse: 80 %\nPower dissipation\t≤ 2.4 W\nOutput\nConnection\tPower Rail\nOutput rated operating current\tmax. 4 A\nOutput voltage\tUi ≥ rated voltage Ur = Ui - 0.6 V\nFault signal\trelay output: NO contact\nContact loading\t30 V AC/ 2 A / cos φ ≥ 0.7 ; 40 V DC/ 2 A\nEnergized/De-energized delay\tapprox. 20 ms / approx. 20 ms\nIndicators/settings\nDisplay elements\tLEDs\nControl elements\tDIP switch\nConfiguration\tvia DIP switches\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2006\nDegree of protection\tIEC 60529:2001\nAmbient conditions\nAmbient temperature\t-20 ... 60 °C (-4 ... 140 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) (W x H x D) , housing type B2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nCertificate\tTÜV 00 ATEX 1618 X\nMarking\tEx-Hexagon II 3G Ex nA nC IIC T4\nDirective conformity\t\nDirective 2014/34/EU\tEN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010\nInternational approvals\nFM approval\t\nControl drawing\t116-0160\nUL approval\tE106378\nCSA approval\tCoC 1051840\nIECEx approval\t\nIECEx certificate\tIECEx UL 16.0051X\nIECEx marking\tEx nA nC IIC T4 Gc", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "30 V", "W x H x D", "35 mm DIN", "Power Rail", "voltage Ur", "connection", "application", "nC IIC T4 Gc", "00 ATEX 1618", "housing type", "x 119 x 115 mm", "contact output", "operating voltage", "maximum utilization", "industrial locations" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 58, "imageuri": "https://productimages.withfloats.com/actual/635e1839ccfae0000102dd2a.png", "tileimageuri": "https://productimages.withfloats.com/tile/635e1839ccfae0000102dd2a.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:22:47.155Z", "updatedon": "2022-10-30T06:22:47.155Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM//kfd2-eb2-r4a-b/58", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "Redundant Power Feed Module", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e174f44ad890001abba37", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD0-SD-Ex1.1245", "description": "1-channel isolated barrier\n24 V DC supply (loop powered)\nCurrent limit 45 mA at 12 V DC\nHousing width 12.5 mm\nUp to SIL 3 acc. to IEC/EN 61508\nGeneral specifications\nSignal type\tDigital Output\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 3\nSupply\nRated voltage\tloop powered\nPower dissipation\t< 1 W\nInput\nConnection side\tcontrol side\nConnection\tterminals 5, 6\nRated voltage\t19 ... 30 V DC\nCurrent\t≤ 72 mA at Ui = 19 V, ≤ 50 mA at Ui = 30 V with 265 Ω output load\n≤ 45 mA at Ui = 19 V, ≤ 31 mA at Ui = 30 V with shorted output\n≤ 14 mA at Ui = 19 V, ≤ 11 mA at Ui = 30 V no load at output\nInrush current\t≤ 200 mA after 100 µs\nOutput\nConnection side\tfield side\nConnection\tterminals 1+, 2-\nInternal resistor\t≤ 238 Ω\nCurrent\t≤ 45 mA\nVoltage\t≥ 12 V\nOpen loop voltage\t≥ 22.7 V\nOutput rated operating current\t45 mA\nOutput signal\tThese values are valid for the rated operating voltage 19 ... 30 V DC.\nEnergized/De-energized delay\tsingle operation: typ. 1.7 ms/50 µs; periodical: typ. 5 µs/50 µs\nGalvanic isolation\nInput/Output\treinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff\nIndicators/settings\nDisplay elements\tLED\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21\nDegree of protection\tIEC 60529\nProtection against electrical shock\tUL 61010-1\nAmbient conditions\nAmbient temperature\t-20 ... 60 °C (-4 ... 140 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 119 x 114 mm (0.5 x 4.7 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tBASEEFA 06 ATEX 0170\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC , Ex-Hexagon II (1)D [Ex ia Da] IIIC , Ex-Hexagon I (M1) [Ex ia Ma] I\nOutput\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I\nVoltage\t25.2 V\nCurrent\t110 mA\nPower\t693 mW\nInput\t\nMaximum safe voltage\t250 V (Attention! The rated voltage can be lower.)\nCertificate\tPF 06 CERT 0971 X\nMarking\tEx-Hexagon II 3G Ex nA IIC T4 Gc\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010\nInternational approvals\nFM approval\t\nControl drawing\t116-0419 (cFMus)\nUL approval\t\nControl drawing\t116-0420 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx BAS 06.0032\nIECEx marking\t[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "30 V", "19 V", "12 V", "Ex ia Da", "Ex ia Ga", "Ex ia Ma", "II 3G Ex", "V DC supply", "limit 45 mA", "x 119 x 114 mm", "operating voltage 19", "industrial locations", "insulation voltage 300", "voltage peak value 375", "electrical isolation acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 57, "imageuri": "https://productimages.withfloats.com/actual/635e1752e52a05000198bdfd.png", "tileimageuri": "https://productimages.withfloats.com/tile/635e1752e52a05000198bdfd.png", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:18:55.768Z", "updatedon": "2022-10-30T06:18:55.768Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM//kcd0-sd-ex1-1245/57", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "Solenoid Driver", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false }, { "_id": "635e167ff7b065000156f2f8", "fptag": "LADDERLOGIX", "merchantname": null, "customwidgets": null, "externalsourceid": null, "name": "KCD2-SCD-Ex1", "description": "1-channel isolated barrier\n24 V DC supply (Power Rail)\nCurrent output up to 650 Ω load\nHART I/P and valve positioner\nLead breakage monitoring\nHousing width 12.5 mm\nSIL 2 (SC 3) acc. to IEC/EN 61508\nGeneral specifications\nSignal type\tAnalog output\nFunctional safety related parameters\nSafety Integrity Level (SIL)\tSIL 2\nSystematic capability (SC)\tSC 3\nSupply\nConnection\tPower Rail or terminals 9+, 10-\nRated voltage\t19 ... 30 V DC\nRipple\t≤ 10 %\nRated current\t≤ 30 mA at 24 V\nPower dissipation\t≤ 600 mW at 20 mA and 500 Ω load\nPower consumption\t≤ 700 mW\nInput\nConnection side\tcontrol side\nConnection\tterminals 5-, 6+\nInput signal\t4 ... 20 mA , limited to approx. 26 mA\nInput voltage\topen loop voltage of the control system < 30 V\nVoltage drop\tapprox. 6 V at 20 mA\nInput resistance\t> 100 kΩ, with field wiring open\nOutput\nConnection side\tfield side\nConnection\tterminals 1+, 2-\nVoltage\t≥ 13 V at 20 mA\nCurrent\t4 ... 20 mA\nLoad\t0 ... 650 Ω\nRipple\t20 mV rms\nTransfer characteristics\nDeviation\tat 20 °C (68 °F), 4 ... 20 mA\n< 0.1 % of full scale, incl. non-linearity and hysteresis\nInfluence of ambient temperature\t< 2 µA/K (-20 ... 70 °C (-4 ... 158 °F)); < 4 µA/K (-40 ... -20 °C (-40 ... -4 °F))\nFrequency range\tfield side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)\ncontrol side into the field side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)\nRise time\t10 to 90 % ≤ 10 ms\nGalvanic isolation\nInput/Output\tbasic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nInput/power supply\tbasic insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nOutput/power supply\treinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff\nIndicators/settings\nDisplay elements\tLED\nLabeling\tspace for labeling at the front\nDirective conformity\nElectromagnetic compatibility\t\nDirective 2014/30/EU\tEN 61326-1:2013 (industrial locations)\nConformity\nElectromagnetic compatibility\tNE 21:2017\nEN 61326-3-2:2018\nDegree of protection\tIEC 60529\nProtection against electrical shock\tUL 61010-1:2012\nAmbient conditions\nAmbient temperature\t-40 ... 70 °C (-40 ... 158 °F)\nMechanical specifications\nDegree of protection\tIP20\nConnection\tscrew terminals\nMass\tapprox. 100 g\nDimensions\t12.5 x 124 x 114 mm (0.5 x 4.9 x 4.5 inch) (W x H x D) , housing type A2\nMounting\ton 35 mm DIN mounting rail acc. to EN 60715:2001\nData for application in connection with hazardous areas\nEU-type examination certificate\tCESI 06 ATEX 021\nMarking\tEx-Hexagon II (1)G [Ex ia Ga] IIC\nEx-Hexagon II (1)D [Ex ia Da] IIIC\nEx-Hexagon I (M1) [Ex ia Ma] I\nOutput\tEx ia\nSupply\t\nMaximum safe voltage\t250 V AC (Attention! Um is no rated voltage.)\nEquipment\tterminals 1+, 2-\nVoltage Uo\t25.2 V\nCurrent Io\t100 mA\nPower Po\t630 mW\nInternal capacitance Ci\t5.7 nF\nInternal inductance Li\tnegligible\nCertificate\tCESI 19 ATEX 021 X\nMarking\tEx-Hexagon II 3G Ex ec IIC T4 Gc\nGalvanic isolation\t\nInput/Output\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nOutput/power supply\tsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V\nDirective conformity\t\nDirective 2014/34/EU\tEN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015\nInternational approvals\nFM approval\t\nFM certificate\tFM 18 CA 0116 X , FM 19 US 0117 X\nControl drawing\t116-0469 (cFMus)\nUL approval\tE106378\nControl drawing\t116-0459 (cULus)\nIECEx approval\t\nIECEx certificate\tIECEx CES 06.0001X\nIECEx marking\t[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I\nEx ec IIC T4 Gc", "price": 0.0, "discountamount": 0.0, "currencycode": "INR", "priority": 1000000, "isfreeshipmentavailable": false, "shipmentduration": 7, "_keywords": [ "20 mA", "Ex ia Da", "Ex ia Ga", "Ex ia Ma", "W x H x D", "V DC supply", "Vpp signal 0", "loop voltage", "control side", "x 124 x 114 mm", "II 3G Ex ec IIC T4", "industrial locations", "insulation voltage 300", "voltage peak value 375", "electrical isolation acc" ], "isarchived": false, "isavailable": true, "applicationid": null, "productindex": 56, "imageuri": "https://productimages.withfloats.com/actual/635e1680c7b01e0001eb363e.jpg", "tileimageuri": "https://productimages.withfloats.com/tile/635e1680c7b01e0001eb363e.jpg", "images": null, "totalqueries": 0, "gpid": null, "groupproductid": null, "createdon": "2022-10-30T06:15:27.102Z", "updatedon": "2022-10-30T06:15:27.102Z", "buyonlinelink": null, "producturl": "https://LADDERLOGIX.NOWFLOATS.COM//kcd2-scd-ex1/56", "availableunits": -1.0, "iscodavailable": false, "isprepaidonlineavailable": false, "maxcodorders": 0, "maxprepaidonlineorders": 0, "uniquepaymenturl": null, "brandname": "PEPPERL-FUCHS", "category": "SMART Current Driver", "tags": null, "variants": false, "keyspecification": null, "otherspecifications": null, "pickupaddressreferenceid": "", "paymenttype": "None", "producttype": "products", "hsncode": null, "gstslab": 0.0, "isnotforsale": false } ], "hasmoreitems": false, "isapirequest": false, "totalresults": 27, "query": null, "floatingpoint": null }